Studer Vista 5 M3 Operating Instructions Manual Download

Page: 465 / 564

6.2 Introduction

6.2.1

Features & Benefits

The Vista DSP Concept

The concept of the Studer Vista allows to use multiple DSP processors in a

fully scaleable and configurable way. It is possible to specify the power of the

DSP core in fine steps in order to fulfil the exact need of an application. It can

be said that the Studer Vista has a scaleable DSP resource pool of computing

power, which can be used in many different combinations.

Session Configuration

So the concept of the ‘Session Configuration’ was born which allows to

create many completely different mixers that can run on the same existing

hardware. The operator is now able to choose the ideal mixer for the task he

or she wants to work on.

For this, the Session Configurations can be loaded and the Studer Vista

console is restarted in a matter of seconds. Each Session Configuration can

contain a different console configuration based on the available DSP power.

In the ever-changing studio environment, it is now possible to have a ‘new’

mixer every day:

Day 1

Day 2

Day 3

Live Broadcast

Configuration

Multitrack Recording

Configuration

Mixdown

Configuration

48 Mono Input Channels with

– EQ

– Delay

24 Stereo Input Channels with

– EQ

48 Inline Channels with

– EQ in monitor path

– Comp/Lim/Exp/Gate in

input path

– Delay

4 Stereo Input Channels with

– EQ

96 Mono Input Channels with

– EQ

– Delay

– Comp/Lim/Exp/Gate

– Surround PAN

4 Stereo Input Channels with

– EQ

0 Routing buses

48 Routing buses

8 Routing buses

8 Groups with

– EQ

0 Groups

16 Groups

2 Master Outputs with

– Output Limiter

– EQ

4 Master Outputs

8 Master Outputs

8 Mono Auxiliaries

2 Stereo Auxiliaries

4 Mono Auxiliaries

4 Stereo Auxiliaries

12 Mono Auxiliaries

4 Stereo Auxiliaries

12 Cleanfeed buses

0 Cleanfeed buses

Channel Types

All channels within the DSP core can be configured as Mono, Stereo or 5.1

channels. The number of channels for any channel type is defined through

the Session Configuration. Moreover, any channel type can be fitted with

the available function blocks from the processing library. So EQ, Delay, or

Dynamics can be fitted to Input Channels, but also to Group Channels, Master

Channels or Auxiliaries in any number and combination. Any combination of

Auxiliary, Cleanfeed, Multitrack Routing, Audio Subgroup and Master Buses

can be configured in the system.

SCore Live Cards

The SCore Live can contain several different card types:

• Up to nine SCore Live DSP cards (up to eight in case of redundant bridge

cards)

• Bridge card (or two redundant bridge cards)

• External Sync card

The lower part of the SCore Live frame can be used for D21m I/O cards (not

listed here).

The system must contain at least one Bridge card for communication and

Vista 5 M3 Digital Mixing System

Session Configuration 6-7

Document generated: 28.08.13

SW V4.9

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands