Studer Vista 5 M3 Page 454 Operating Instructions Manual Download

Page: 454 / 564

Vista 5 M3 Digital Mixing System

5-158 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.22.7 Miscellaneous

This option page contains options not addressed elsewhere.

Protect Static

When Stopped

>: Changes to Static objects will be ignored unless the

system is ‘Mixing’ (timecode running or stop frame mode).

For Protected Controls

>: When a control is protected (out of scope)

changes to the control will not be stored as Static values. They can be audi-

tioned and will return to their stored value when a new Mix Pass is started.

For Non-Automated Controls

>: Changes to non-automated objects (like

Pan format) will not be stored as Static values. They can be auditioned and

will return to their stored value when a new Mix Pass is started.

From Kill Pass

>: Stored Static values are not affected by

Dump

(Kill Pass)

operations.

Modified Untouch Inverts

Touch Record

>: The

ISO (AUTO MODE)

key acts as a modifier key for

certain functions. For example, if the modifier key is held when an enabled

control is touched, the control will or will not go into record based on the in-

verse of the setting of the

TOUCH – Record

function (of the ACU window).

Normally, when this radio button is selected, when un-touching a control,

if the modifier key is held, the

TOUCH – Record

functionality is again

reversed.

Touch Hold

>: By selecting this option, when un-touching a control, the

effect of

TOUCH – Hold

is reversed rather than that of

TOUCH – Record

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands