Studer Vista 5 M3 Operating Instructions Manual Download

Page: 415 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-119

Document generated: 28.08.13

SW V4.9

5.17.2.5

Function Controls

A set of function controls is provided below the Channel/Object Selector

windows. These function buttons are as follows:

Copy

copies the Selected Objects Set to the PC clipboard;

Paste

pastes the contents of the PC clipboard (copied Selected Objects Set) to the

Object Picker;

Save…

saves the Selected Objects Set as a file;

Load

allows saved object files to be reloaded;

Clear

clears the selection of all objects;

Apply

selects the objects chosen in the Object Picker for editing;

Copy Picked on OK

if checked, the Selected Objects Set is copied to the clipboard when the ‘Ap-

ply’ button is clicked;

Cancel

cancels changes made to the Selected Objects Set since the last set was ap-

plied, saved, loaded, copied, or pasted.

Once an object or set of objects has been selected in the Object Picker, they are

then selected for editing by clicking the ‘Apply’ button. The selected objects

from the selected channels will be displayed in the ‘Selected Objects’ window.

Those are the only objects that will be affected when edits are performed.

Note

If an object has been chosen but a channel has not, the object will not be

selected for editing when the ‘Apply’ button is clicked.

Open Mix Selector Tabs

A set of tabs, each of them representing a mix, are located at the bottom of the

Object Picker window (bottom left in the picture above). Every mix that is

currently open in the OFLA has its own tab. When the mix selector menus are

set to ‘Selected Mix’, these tabs are used to choose a mix by simply clicking

on the appropriate tab.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands