Studer Vista 5 M3 Page 409 Operating Instructions Manual Download

Page: 409 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-113

Document generated: 28.08.13

SW V4.9

5.17.2.1

Object Picker

The Object Picker is used to select the elements within a mix you wish to

edit. These elements are organized into channels and objects within channels.

Selection of elements can be as specific as an individual parameter value,

within a particular object, within a single channel, and as broad as all param-

eters, within all objects, within all channels.

Note

It is important to realize that the channels and objects displayed in the picker

are the same as contained within the VMC used to create the title and mix. If

a different VMC is loaded, the channels and objects will change accordingly.

In other words, the elements that appear in the Object Picker are determined

by the console configuration that was in use when the data was created.

There are five main sections in the Object Picker:

• Channel Selector window;

• Object Selector window;

• Channel/Object Tree display area;

• Function controls;

• Open Mix Selector Tabs.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands