Studer Vista 5 M3 Operating Instructions Manual Download

Page: 401 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-105

Document generated: 28.08.13

SW V4.9

5.17 Offline Mix Editing

There are two methods of offline editing of Mix Passes:

• Event List Editing: The location of automation records may be moved or

‘slipped in time.’ Automation records may also be deleted. Control values

may not be edited.

• OFLA Editing: Allows the value of automation records to be changed

within a timecode window. Controls can also be reset to their default

values or have their values frozen or spread across the timecode window.

Controls can be made Static and Mix Passes may be merged.

Together, these methods provide powerful and easy-to-use means of fine

tuning Mix Pass data or working with Edit Decision Lists. Each Method of

editing is described below.

5.17.1 Event List Editing

Automation data may be edited using the Event List Editor within AutoTouch-

Plus. Being fully integrated within AutoTouchPlus, the Event List Editor

provides quick and easy means of moving the location of automation records

(Events). Automation events can also be deleted.

Accessing the Event List Editor

The Event List Editor is available by selecting ‘Event List Editor’ from the

GC Automation menu.

This action will open the Event List Editor window.

Events and Event Lists

As a mix progresses, Events (automation records) are recorded at timecode

locations within a Mix Pass. These Events are organized by timecode and

displayed in the Event List Editor. If more than one Event is recorded at the

same timecode location, an Event List is created at that location. The Event

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands