Studer Vista 5 M3 Operating Instructions Manual Download

Page: 246 / 564

Vista 5 M3 Digital Mixing System

4-102 GC Operation

Document generated: 28.08.13

SW V4.9

Restore Backup

This action opens the Restore Backup window entitled, where a backup

directory is selected for reloading.

To restore a backup directory:

• Select Restore Backup from the File menu;

• Highlight the desired backup directory;

• Click the OK button or press

Enter

on the keyboard;

A pop-up dialog box will appear giving you the option of replacing the exis-

ting title, saving the restored title as a new title, or canceling the backup. If

you select ‘Replace the Existing Title’, you will not be able to replace the

Session Configuration if it is currently loaded and will be given the option

to continue. You will also have the opportunity to replace the monitor file

if it also exists. Choosing ‘Restoring the Title As’ will result in the normal

Window’s save screen.

Notes

Regardless of the method used to create it, after a backup has been restored,

the resulting title must be opened before use.

If you move production data between different consoles, it is advisable not to

restore certain files onto the destination console, since it may have different

hardware. This is valid in particular for the

monitoring.ini

files. You will

be asked whether you want to restore these files as well; in this case answer

negative if the two consoles are not identical in terms of monitoring.

4.6.1.4

Import

Using the Import utility in the File menu, snapshots, presets, mixes, and titles

can be imported.

Import

This action is used to select the type of data you wish to import. Once the

type of data is selected, an open window appears allowing to select the data

source. The following rules apply when using the Import utility:

• Snapshots and mixes can only be imported into an open title

• Imported presets will be saved with the current DSP configuration

• Items can be renamed as the are imported

• A title will need conversion if it is imported for use with a different DSP

configuration

Note

Importing a snapshot, preset, mix, and/or title will not autmatically make it

the current one. For example, a snapshot will not be applied to the console

upon being imported. It must be recalled, in addition, using the snapshot page.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands