Studer Vista 5 M3 Operating Instructions Manual Download

Page: 239 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-95

Document generated: 28.08.13

SW V4.9

4.5.3

Channel Selection

This tool allows one console Channel to be selected for control of various

centralized functions on the graphical controller, such as Channel Patch.

There are three arrow buttons:

Selects the

previous channel

from the list;

Selects the

next channel

from the list;

Opens the

full Channel List

to select a channel. Labels are displayed according

to the selected Label Mode (refer to

chapter 4.3.3

4.5.4

System Functions

4.5.4.1

System Functions: Protect/Unprotect SysAdmin Mode

This action allows the system user mode to be toggled from Standard to

system admin istration. The system administration mode allows access to

some system functions that are not needed in normal operation.

Accessing the system administration mode can be accomplished in two ways:

• Clicking the

padlock icon in the toolbar;

• Selecting SysAdmin… in the User menu.

From

Standard Mode

(closed padlock icon): Click on the padlock icon, or

select SysAdmin… in the User menu. You will be asked to enter the system

administration Password.

After complying with the request, an additional menu item – SysAdmin – will

appear in the menu bar.

From

system administration mode

(open padlock icon): Click on the padlock

icon or select Protect in the User menu to exit this mode.

For more details on the User/Protect menu and the system admini stration

menu, refer to

chapters 4.6.5

and

4.7

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands