Studer Vista 5 M3 Page 235 Operating Instructions Manual Download

Page: 235 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-91

Document generated: 28.08.13

SW V4.9

Click on the



(Copy/Paste) button of the desired function in order to activate

copying. The button will light, and all possible destination keys on the console

surface will be half-lit. Shortcut: A double-click on the clipboard name in the

list will activate copying of all contained audio values within that particular

file directly.

Paste the value into one or more channels of the console, using the standard

functionality. If the clipboard contained multiple audio settings, such as EQ

and Dynamics, they may be pasted together by pressing the



(Copy/Paste

All) key of the destination channel.

4.4.7.4

Rename/Delete a Clipboard Library File

Open the Clipboard Library window (see above).

Select the file you want to change or delete by clicking on it. Click on the

‘Rename’ or ‘Delete’ button of the Clipboard Library window in order to

execute the desired action.

Close the Clipboard Library window (see above).

4.4.7.5

Clear the Display

By clicking on the ‘Clear’ button, the previewed settings are cleared, and no

graphical indication is shown on the right-hand side of the window.

4.4.7.6

Update a Clipboard File

To combine, for instance, the current dynamics settings of a channel with the

EQ settings that are already in the library, and to save them as one new set

into the library, proceed as follows:

Open the Clipboard Library window (see above).

Select the desired, already saved EQ setting by clicking on it once. The EQ

settings will be displayed graphically on the right-hand side of the window.

Press the



(Copy/Paste) key in the dynamics section of the source channel

on the console.

Click on the half-lit



(Copy/Paste) button in the dynamics section of the

window.

Both EQ and dynamics values will now be displayed on the right-hand side

of the window.

The Save dialog opens. Once saved, the new, combined set will now be dis-

played within the ‘Combined’ tab.

Close the Clipboard Library window (see above).

4.4.7.7

Storage Format

Each clipboard is saved in a file with a

.cpy

extension. Multiple

.cpy

files

form a library. A

.cpy

file may contain only one audio function (e.g. EQ

settings) or a combination of any audio functions of a channel (e.g. EQ and

Dynamics settings).

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands