Studer Vista 5 M3 Page 234 Operating Instructions Manual Download

Page: 234 / 564

Vista 5 M3 Digital Mixing System

4-90 GC Operation

Document generated: 28.08.13

SW V4.9

4.4.7.1

Clipboard Library Window

The Clipboard Library window is automatically opened whenever a paste

function is pending on the Vista console. In order to open the window manu-

ally (e.g., to load the console clipboard with a saved value), select the corre-

sponding icon from the toolbar or press the

OPTIONS F4

key on the console.

It is also possible to select the window from the View menu.

The window may be closed by clicking on the close box on the top right corner

of the window, by clicking on the Close button, or by pressing

again.

4.4.7.2

Paste into Clipboard Library

Press the



(Copy/Paste) key on one or more audio functions of any channel

strip(s) on the console surface. The Clipboard Library window will be opened

automatically whenever a paste operation is pending.

Click on the half-lit



button in the window. If multiple audio functions are

pending to be pasted (e.g. EQ and Dynamics settings), it is possible to click

on the half-lit



(Copy/Paste All) button in the window. The pasted values

will be graphically displayed.

The Save dialog opens, now you can give a name to the clipboard. It will be

saved in the currently active Clipboard library.

Close the Clipboard Library window (see above)

4.4.7.3

Copy from Clipboard Library

Open the Clipboard Library window (see above).

If the desired library is not opened already (indicated in the title bar of the

window), open the requested library by selecting ‘Open Library’ from the

File menu.

Select the desired tab. Each of them represents a group of saved settings,

which mans that all listed files within a tab have the same type of audio

function settings. ‘All files’ will show a list of

all

available clipboard files

within this library, containing all the content of the other tabs. Files in the

‘Combined’ tab contain a combination of audio function settings. (e.g. EQ

and Dynamics settings together). Files in the ‘Copy All’ tab contain complete

channel settings.

Select a clipboard setting from the list by clicking on it. This will activate a

preview function on the panel, shown at the right-hand side of the window.

In this way it is easy to search for a special setting by looking at its graphical

representation. The preview function lets you also identify which audio func-

tions are contained in the selected clipboard file: The graphical representation

of their ‘On/Off’ key will be grayed-out if there is no value present in this

file.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands