Studer Vista 5 M3 Page 211 Operating Instructions Manual Download

Page: 211 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-67

Document generated: 28.08.13

SW V4.9

All channels currently muted are indicated in red. The ones being part of a

VCA group have the group number in their upper part. When right-clicking

on one of the channels, a list with all group assignment possibilities pops up;

a channel can also be muted or un-muted without an assignment to a VCA

group.

A detailed theatre workflow tutorial is given in

chapter 4.4.5.3

4.4.5.2.11

VCA / Channel Mute Mode

A snapshot includes all audio parameters of the console by definition. This

means that the sound designer would have to specify for each cue what audio

parameters should be masked from snapshot recall, so that only certain param-

eters change. In most cases however, making changes of VCA assignments,

VCA labels, and channel mute status per cue is preferred, rather than working

with snapshots in the ‘normal’ sense. Aside from this, the desk has to work in

a manual way whereby the operator is not concerned with snapshot recall but

only with changes of certain parameters within certain cues. The theatre cue

list offers a philosophy that does not only deal with snapshots and attached

recall masks per cue, but offers that the snapshots of the VCA/mute and other

parameter changes are handled per cue by a library system that stores the

parameters.

Please note that the VCA assignment and channel mute parameters are neither

saved nor overwritten by snapshots.

This functionality is enabled in the

D950system.ini

file by the system

administrator (

[options]

TheatreMode=Yes

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands