Studer Vista 5 M3 Operating Instructions Manual Download

Page: 163 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-19

Document generated: 28.08.13

SW V4.9

4.4.2.1.2

Other Navigation Methods

Choosing Source/Target Subcategory:

There are two methods to select the required Source/Target subcategory:

Use the Source/Target subcategory drop-down menu.

Right-click directly in the Sources/Targets List. All the available sub-

categories (identical to those in the drop-down menus) can be accessed

directly from the lower portion of the menu.

Sources: Targets:

Using

Auto Select

For faster selection of the Source/Target subcategories, a useful feature can

be activated called

Auto Select

. To activate this function, activate the

Auto

Select

checkbox.

This function will automatically select the most logical subcategory of Targets

as soon as a Source Subcategory is selected. That is, if the

Digital In

Source

Subcategory is selected, the Targets List will automatically switch to show

the

Channel In1

subcategory. However, even if this option is selected, it

is possible to navigate to other Target subcategories manually after Source

navigation.

Using of Color for Navigation:

Color is used in the Sources and Targets lists to give a clear indication and

overview of the sources and targets which have connections patched. If a

Source is connected to a Target or multiple targets, the Source label in the

Sources List will be highlighted by a color. Similarly, if a target is connected

to a Source or a number of different Sources, then the Target label in the

Targets List will be highlighted by a color. The meaning of the colors is as

follows:

GREEN

A single connection is made to the indicated Source or Target.

YELLOW

Two or more connections are made to the indicated Source or Target.

RED

The Target has a protected connection.

If a Source or Target is highlighted (indicating a connection has been made

to it), double-clicking on the label in the Sources/Targets Lists will navigate

directly to the cross-point so that the Source Selection bar and Target Selection

bar intersect at that cross-point. This is an extremely fast method to find what

is connected to a Source or Target without the need for scrolling or manual

searching of the sub patches. If a Source or Target is highlighted in Yellow

(indicating two or more connections are made to it), double-clicking on the

label in the Sources/Targets Lists will navigate directly to the first cross-point.

Subsequent double-clicks will navigate to each of the following connections

that are made to the Source/Target in question. If all connections have been

shown, a further double-click will return the user to the first connection and

loop around the connections once again with further double-clicks.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands