Studer Vista 5 M3 Operating Instructions Manual Download

Page: 119 / 564

Vista 5 M3 Digital Mixing System

Parameters 3-31

Document generated: 28.08.13

SW V4.9

3.4.2.2

Standard Dynamics for 5.1 Surround Channels

Touch the green Vistonics dynamics field.

This view is the same as with mono or stereo channels with one exception,

refer to the screenshot below.

Please note that the dynamics settings applied

here will be valid for all surround signal legs except the LFE

If a dynamics setting has been made on a 5.1 surround channel, the default

Vistonics dynamics display shows in small characters which signal leg is

different from the others (in this case, only ‘Lf’ is shown since the LFE’s EQ

setting is not modified), as shown left.

If one or more of the signal legs must be adjusted differently from others –

such as adding expansion in the center channel only, the

CHANNEL VIEW

has

to be selected. Then all the separate dynamics settings for ‘Front’, ‘Center’,

‘LFE’ and ‘Rear’ are accessible. Please note that there also is a gain reduction

indication at the left of each of the four individual dynamics icons.

Parameters Shared by the Dynamics Functions

SC LINK

The Side-Chain Link function allows forming a side-chain group from up to

eight channels in order to control the dynamics of all of them by the maximum

level of all side-chain group members. Side-chains are defined in the GC’s

Channel Patch window (‘Sidechain Link Setup’, tick ‘Enable side Chain

Link’). The rotary encoder selects the surround signal legs used for the side-

chain group; for details, see the block diagram below.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands