Studer Vista 1 Operating Instructions Manual Download Page 270

Page: 270 / 401

Vista 1 Digital Mixing System

4-94 GC Operation

Document generated: 18.04.17

SW V5.3

4.4.7.8

import a Clipboard File from Another library

Select ‘Import Clipboard’ from the file menu.

Navigate to the desired library.

Open the desired

.cpy

file. It will automatically appear and be saved within

the library currently active.

4.4.7.9

Where are Clipboard libraries Saved?

If you don’t want to maintain multiple libraries on your console, you never

have to change or define a name; just start directly, using the library func-

tionality. The system will then use a library called

DefaultClipboardLib

If there are multiple libraries, you may select ‘Open Library’ from the file

menu of the clipboard window in order to select another library to work with.

It is also possible to save the whole library under a different name or to save

it to a portable storage device such as a CD-R by selecting ‘Save Library’ in

this file menu. Selecting ‘New Library’ in the file menu creates a new, empty

library.

In technical terms, a library is a subdirectory of the

C:\D950System

Users

directory, it may also be located within any other user subdirectory. Selecting

‘New User’ creates a new user directory containing an empty Library called

ClipboardLib

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands