pg 15
DIG
- dual digital delay
Live Edit Functions
MIDI Clock Sync
Selects whether the delay time for Delay 1 will sync to incoming MIDI
Clock messages�
1
Press and hold the
ON
footswitch� Once both LEDs flash, release the
footswitch�
2
Set the position of the
TYPE
(
MIDI CLOCK SYNC
) switch to select
whether DIG will sync to incoming MIDI Clock messages� Both LEDs
will momentarily change color to indicate the current status as you
set the switch�
• Set the switch down to
12 bit
for
Off
(default): both LEDs light
RED
- DIG will not respond to MIDI Clock�
• Set the switch up to
24/96
for
On
: both LEDs light
BLUE
- DIG will
respond to MIDI Clock�
NOTE: When synced to MIDI Clock, the LEDs will light
PINK
, and the
TIME
knob will act as a multiplier or divider of the incoming clock tempo� The
synced
TIME
mult/div settings are: x4 (min), x3, x2, x1 (at 12 o’clock), 1/2,
1/3, and 1/4 (max)�
3
Press the
ON
footswitch to exit and store your MIDI Clock setting�
NOTE: The MIDI Clock setting is saved per Favorite setting or per MIDI preset�