Stryker SwitchPoint Infinity 2, Operation And Maintenance Manual, Page: 43 / 82

41
Select any preset to one-touch dial the stored location. After selecting a preset, the interface will automatically
navigate to the “Active Call” screen.
12.4 Off-site (Codec) Calls
Off-site or Codec calls can be initiated from the “Manual Dial” screen as well as the “Last 10 Dialed” and “Call
Groups” interfaces.
Up to six different types of off-site calls are available, depending on the options available on the Codec and
whether there is a local Codec or one or more Video Network Hub™ Codec(s) available.
12.5 Making a Codec IP Call
To dial a Hub Codec IP or Local Codec IP call:
1. Select the call type from the “Connection Type” drop down menu.
2. Select the Codec to be used from the “Codec Name” drop down menu.
3. Select the call “speed” or bandwidth from the “Connection Speed” drop down menu.
4. Enter the IP address using the on-screen keypad.
5. Press the green
Call
button located below the number pad to initiate the call.
or
6. Press the Store Number button to store the call information to “Call Groups” presets.
12.5.1 Making a Codec ISDN Call
To dial a Hub Codec ISDN or Local Codec ISDN call:
1. Select the call type from the “Connection Type” drop down menu.
2. Select the Codec to be used from the “Codec Name” drop down menu.
3. Select the call “speed” or bandwidth from the “Connection Speed” drop down menu.
StockCheck.com