Stryker SwitchPoint Infinity 2, Operation And Maintenance Manual, Page: 41 / 82

39
12.2.6 Last 10 Dialed
The “Last 10 Dialed” call screen displays the last 10 room or off-site calls made from that endpoint.
To access the “Last 10 Dialed” screen, select Calls from the menu bar and then select the Last 10 Dialed sub tab.
Any endpoint or remote site displayed on the “Last 10 Dialed” screen can be dialed with one-touch dialing by
pressing the entry. The SwitchPoint Infinity® 2 Control System will automatically attempt to connect to the
destination. If the call is successful, you will be taken to the “Active Call” screen.
Note
Before selecting an entry on the “Last 10 Dialed” screen, prepare the outgoing video signal with
the “What you send” and “Where you see it” drop down menus.
12.3 Call Groups
The “Call Groups” tab provides call-specific presets for call types available from the SwitchPoint Infinity® 2
Control Interface. Once a Preset is stored in the “Call Groups” section, the call can be placed using one-touch
dialing from the “Call Groups” tab.
Note
Before storing a new Preset in the Call Groups section, enter the connection type, dialing number,
and any other necessary calling information in the “Manual Dial” interface and press the
Store
Number button.
12.3.1 Creating and Storing a Call Preset
To store a preset:
1. Select the white text field or the Edit button next to the “Enter Name” field.
a. Enter the preset name using the on-screen or attached keyboard. The preset name can be no longer
than 13 characters, including spaces.
StockCheck.com