Stryker SwitchPoint Infinity 2, Operation And Maintenance Manual, Page: 40 / 82

38
12.2.5 Campus Status
The “Campus Status” screen allows you to view the status of all registered endpoints in the ORIS, and the ability to
call any available endpoint using one-touch dialing. Available endpoints are shown as “Idle.” Endpoints that are
set to Private status are shown as “Private.” Endpoints that are not currently connected or are powered off appear
grayed-out with an “Offline” status message.
To access the “Campus Status” screen, select “Calls” from the menu bar and select the “Campus Status” sub tab.
Selecting any room from the “Campus Status” interface will automatically initiate a call with that room. If the call
is successful, you will be taken to the “Active Call” screen.
Note
Accessing the off-site Codec is not available from the “Campus Status” interface.
StockCheck.com