Stryker SwitchPoint Infinity 2, Operation And Maintenance Manual, Page: 37 / 82

35
The “What you send” and “Where you see it” drop down menus are a convenient way to route video to and from
the Video Network Hub™ before making a call. The “What you send” drop down menu contains a list of all
configured sources and devices capable of being routed out of the room. When a source or device is selected from
the “What you send” list, it is previewed in the video preview frame above the drop down menus. The “Where you
see it” drop down menu lists all devices or displays that incoming video can be displayed on.
12.2.1 Manual Dial
The “Manual Dial” tab allows you to make different types of calls without a preset, store numbers to “Call
Groups” presets, and to “Wait for” an incoming Codec call. To access the “Manual Dial” tab, select “Calls” from
the menu bar and then select the “Manual Dial” tab on the “Calls” screen.
12.2.2 Room-to-Room Call
To make a video call to another room within the campus:
1. Select “Room” from the “Connection Type” drop down menu.
Note
For in-depth information on local and Video Network Hub™ Codec call, please see the “Offsite
(Codec) Calls” section of this manual.
Note
For in-depth information on Broadcast, View Only, and Meeting Room call types, please see the
“Advanced Call Types” section of this manual.
2. Select which room to connect to from the “Room Name” drop down menu.
3. Press the green Call button under the number pad to make the call.
You will see a brief “Connecting Call” message in the green “Call Status” bubble in the upper right-hand corner of
the screen. If the call is successful, you will be taken to the “Active Call” screen.
StockCheck.com