Stryker SwitchPoint Infinity 2, Operation And Maintenance Manual, Page: 34 / 82

32
11. Presets
Presets are a time saving function for remembering frequently used room configurations. Presets may be sorted
into six user-defined groups or left in a single undefined grouping. The figure below shows one group of presets.
To access the “Presets” screen, press the
Presets button on the menu bar.
The SwitchPoint Infinity® 2 Control System supports up to 50 presets in each of the six preset groups. If more than
eight presets have been configured, a scroll bar will appear on the right side of the screen. The current page
number and the number of pages will appear between the up and down scroll buttons.
11.1 Recalling Presets
To recall a stored preset, press the button marked with the named preset.
11.2 Saving a Preset
Before storing a new preset, begin by setting up all of the video routing choices, camera positions, and audio
mixes for the SwitchPoint Infinity® 2 Control System.
Press the Save Preset button on the “Presets” screen. The “Save Preset” screen will appear, as shown above.
1. Select the white text field or the Edit button next to the “Enter Name” field. A keyboard screen will appear.
2. Enter the preset name using the on-screen keyboard that appears, or the attached keyboard. The preset
name can be no longer than 13 characters, including spaces.
3. Press Enter when you are done. The “Enter Name” field will display the new preset name.
4. Select the preset group where you want to save your new preset. If only one preset group has been
configured, it will be selected by default.
5. Select the function(s) that your new preset will control. For example, if this is a video preset, select the
Video button. To save a preset that has video, audio, and camera settings, select all three buttons.
6. Press the Done button to save your new preset. To cancel the preset, press the red “X” button at the top
right-hand corner of the screen. You will be returned to the Presets screen.
StockCheck.com