TTrroouubblleesshhoooottiinngg
PPrroobblleem
m
PPoossssiibbllee CCaauussee
SSoolluuttiioonn
Support surface will not inflate
Support surface has no power
See
No power
CPR pull is active
Pull down the CPR to reset
Support surface menu is available on
the IInnTToouucchh bed screen
Check the connection of the support
surface integration cable (see
Installation)
Pod manifold connector is not set
Set the pod manifold connector and
secure
Pump does not run when you start
Max Inflate
Check for 24VDC (variable) is going to
the pump on connector F on the main
board pin 1 (yellow) and pin 2 (black)
(see
12))
1. If voltage is present, replace pump
assembly
2. If no voltage present, replace the
control board
Solenoids or pod assembly possible
disconnected hose connections
Check the hose connections,
solenoids, and pod assembly
No left turn inflate
Left turn bladder hose quick
connection coupler loose or
disconnected
Make sure that the left turn bladder
hose quick connection coupler is
together and locked
Pod manifold connector loose or
disconnected
Make sure that the pod manifold
connector is set into the manifold and
set
Turn bladder possible leak
Listen for air flowing into the turn
bladder
Look for a leak in the turn bladder
If you find a leak, replace the turn
bladder assembly
Turn bladder no air enters
Make sure that the LED (D30) is lit to
show the TLI solenoid is energizing
(see
(page 13))
If energized, replace the TLI inflate
solenoid
No left turn deflate
Left turn bladder hose quick
connection coupler loose or
disconnected
Make sure that the left turn bladder
hose quick connection coupler is
together and locked
Turn bladder no air exits
Make sure that the LED (D31) is lit to
show the TLD solenoid is energizing
(see
(page 13))
If energized, replace the TLD inflate
solenoid
2972-009-002 Rev AA.0
19
EN
Summary of Contents for Isolibrium 2972
