Stryker ComfortGel SE 1805-034-300, Operation Manual, Page: 17 / 432

C Co ovve err rre ep plla acce em me en ntt
W WA AR RN NIIN NG G -- Do not wash the internal components of this support surface. Discard the support surface if a contamination is
found inside.
T To oo ollss rre eq qu uiirre ed d::
• None
P Prro occe ed du urre e::
1. Unzip the cover.
2. Fold the top of the cover to the patient’s right side and then remove the foam crib assembly from the stretcher and set
aside.
3. Discard the old cover.
4. Place the new cover, unzipped and open, on the frame with the grey bottom cover on the litter and the top cover folded
over the patient’s right side of the stretcher.
5. Carefully place the foam crib assembly on top of the bottom part of the cover to make sure that the foam crib is Align
with the cover.
6. Fold the top cover over the top of the foam crib assembly. Make sure that the top cover is aligned with the foam crib
assembly.
7. Zip the cover to close.
1805-009-005 Rev AB.0 13 EN