Stryker AIR+ 2863, Maintenance Manual

Page: 6 / 46

S Se errvviicce e
P Po ow we erriin ng g O OF FF F tth he e p pu um mp p
Press the power button and hold for two seconds to power OFF the pump.
F Fu usse e rre ep plla acce em me en ntt
Fuse: F3.5AH250V
T To oo ollss rre eq qu uiirre ed d::
• Slotted screwdriver
• Digital multimeter
P Prro occe ed du urre e::
1. Unplug the power cord from the wall outlet.
2. Unplug the support surface tubing from the pump.
3. Place the pump face down on a work surface.
4. Using a slotted screwdriver, remove the fuse cover located below the power inlet. Save the fuse cover.
N No otte e -- If you need to check a fuse, use a digital multimeter.
5. Remove and discard the fuse.
6. Reverse steps to reinstall.
7. Verify proper operation before you return the product to service.
B Bu um mp pe err rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Small slotted screwdriver
• G Go oo off O Offff® Household Heavy Duty Remover
P Prro occe ed du urre e::
1. Unplug the power cord from the pump.
2. Unplug the gray AST and red CPR connector from the pump.
3. Using a small slotted screwdriver, scrape under each bumper to remove. Start from the corner of each bumper to
remove the top bumper (A), bottom left bumper (B), and bottom right bumper (C) from the back cover (D) (Figure 1).
Discard the bumpers.
EN 4 2863-009-002 Rev AA.1