Stryker 4402-000-001 Maintenance Manual Download Page 9

Page: 9 / 42

Fiig

urre

e 3

3 –– B

asskke

ett ttrre

d cca

attcch

5. Using a 3/8” nut driver, remove the two nuts (AB) that secure the trend catch (AA). Save the nuts.

6. Grasp both sides of the top cover cradle (U) and pull up until the bottom and the top cover V

ellccrro

o® separate.

7. Remove and discard the cradle top cover.

8. Reverse to install.

otte

e -- Once the top cover is in place, firmly press on the top cover to secure the V

ellccrro

o®.

9. Verify proper operation before you return the product to service.

Crra

dlle

e b

otttto

m cco

ovve

err rre

plla

acce

ntt

ollss rre

uiirre

d::

•

1/8” Hex wrench

•

5/32” Hex wrench

•

T15 Torx driver

•

Rubber hammer

Prro

occe

urre

e::

1. Apply the brakes.

2. Remove cradle top cover. See

Cradle top cover removal/replacement

(page 6).

4402-009-002 Rev AB.1

Summary of Contents for 4402-000-001











































Search results

Summary of Contents for 4402-000-001

Reviews:

Related manuals for 4402-000-001

Brands by name

Popular brands

Stryker 4402-000-001, Maintenance Manual

Search results

Summary of Contents for 4402-000-001

Reviews:

Related manuals for 4402-000-001

Brands by name

Popular brands