F
Fiig
gu
urre
e 1
13
3 –– M
Ma
aiin
n b
bo
oa
arrd
d
4. Using needle nose pliers, apply a slight upward pressure on the main board to unclip the seven plastic standoffs.
N
No
otte
e -- During reinstall, align the standoffs to the main board and press near the standoffs to seat the main board. Do not
bend the board.
5. Remove and discard the main board.
6. Reverse steps to reinstall.
N
No
otte
e
•
During reinstall, align the V
Ve
ellccrro
o® patches.
•
After installation, remove the zipper pull tool or equivalent from the zipper.
•
Cover the zipper with the support surface watershed.
•
Do not dispose of as unsorted municipal waste. See your local distributor for return or collection systems available in
your country.
7. Verify proper operation before you return the product to service.
P
Po
ow
we
err//d
da
atta
a cca
ab
blle
e cco
on
nn
ne
ecctto
orr rre
ep
plla
acce
em
me
en
ntt
T
To
oo
ollss rre
eq
qu
uiirre
ed
d::
•
Zipper pull tool or equivalent
•
7/8” combination wrench
P
Prro
occe
ed
du
urre
e::
1. See
2. Using your fingers, disconnect the power/data cable connector (AP) from the foot box and rotate the turn-lock
counterclockwise (Figure 14).
3. Using a 7/8” combination wrench, remove the retention nut (BK) on the power/data cable connector that secures it to the
foot box. Save the nut.
EN
34
2973-009-002 Rev AB.0
Summary of Contents for 297300000000
