www.stryker.com
2920-109-001 REV G
23
Operation
Starting and stopping turn assist with the optional InTouch footboard (Continued)
A
B
C
D
Button
Name
Function
A
Start
Starts Turn Assist and switches to
Hold
A
Hold (Not Shown)
Pauses Turn Assist and switches to
Continue Turn
A
Continue Turn (Not Shown)
Continues Turn Assist and switches
to Hold
B
Increase Time
Increases the timer up to a maximum
of 120:00 minutes
C
Decrease Time
Decreases the timer
D
Back
Returns to the Support Surfaces
main screen to access the Stop
button to deactivate the Turn Assist
Alarming call maintenance with the optional InTouch footboard
The alarm conditions Call Maintenance LED illuminates red and flashes to indicate a hazardous situation has been
detected. Review the Error Alarms section and call appropriate technical support personnel.
Transferring a patient to and from the support surface
To transfer a Patient:
1. Lock the brakes on both of the platforms that the patient is being transferred to and from (beds or stretchers).
2. Position the patient along the center line of the support surface.
3. Press the
Max Inflate
button until the support surface has reached maximum inflation.
4. Adjust the height of both platforms to the same level.
5. Transfer the patient following all applicable safety rules and institution protocols for patient and operator safety.
6. Press the
Stop
button to turn off Max Inflate.
