Struers Accutom-50, User Manual

Page: 20 / 226

Accutom-50
Instruction Manual
16
To select between cutting and grinding you must be in the Main
Menu. As Accutom-50 always starts up in the same state as when
the voltage was switched of last time, it might be necessary to go
back to the Main Menu.
To go back to the Main Menu:
Esc

Press Esc, until the MAIN MENU display appears.
(A long beep can be heard).

MAIN MENU
CUTTING METHODS
GRINDING METHODS
MANUAL FUNCTIONS
CONFIGURATION




Press MENU UP/DOWN


to select between
CUTTING METHODS and GRINDING METHODS.

Press ENTER


, to accept the selection.
If you selected CUTTING METHODS, the
screen will appear as follows.
Selecting between
Cutting and Grinding