Struers Accutom-5, Instruction Manual

Page: 43 / 236

Accutom-5
Instruction Manual
39

Place the main cursor on the character you want to change,
using F1:LEFT or F4:RIGHT. Use MENU DOWN


Write the new name using the following keys:
to move to
the character set in the next line. An auxiliary cursor in the text
line shows the position in the method name.
F1 Moves the main cursor to the left
F2 Inserts a space in the text
F3 Deletes one character to the left in the text
F4 Moves the main cursor to the right

ENTER places the new character in the method name and
moves the auxiliary cursor in the name to the right. Repeat
the procedure for each character.

Write the new name using the above name editing
procedures.
Esc

Press Esc to leave the editor again.

NAME CHANGED
The name is changed, do you want to keep
the old name, or accept the new name ?
ENTER:ACCEPT NEW NAME ESC:KEEP OLD
NAME


Press ENTER

to accept the new
name.
Name Editing Principles