Struers Accutom-5, Instruction Manual

Page: 14 / 236

Accutom-5
Instruction Manual
10
Name Key Function Name Key Function

MAIN
SWITCH
The main switch is located on
the back of the machine.

ESC
Esc
Leaves the present menu or
specimen holder position screen.

START
 Starts the cutting process
according to the pre-set method.
The recirculation water, if
selected, is turned on.

FAST
POSITION
LEFT
 Changes to POSITION menu or
moves the specimen holder to the
left in the X-direction in steps of
100 µm. Keep the key pressed to
increase the speed.

STOP
 Stops the cutting process. The
recirculation water, if selected, is
turned off.

FAST
POSITION
RIGHT
 Changes to POSITION menu or
moves the specimen holder to the
right in the X-direction in steps of
100 µm. Keep the key pressed to
increase the speed.

FUNCTION
KEYS
F1/F2
F3/F4
Controls for various purposes.
See the bottom of the individual
screens.

POSITION
LEFT

Changes to POSITION menu or
moves the specimen holder slowly
to the left in the X-direction in
steps of 5 µm. Keep the key
pressed to increase the speed.

MENU



Scrolls up (

) or down (

) in the
menu tree structure of Accutom-
5. When setting a parameter the
value is increased (

) or
decreased (

).

POSITION
RIGHT
Changes to POSITION menu or
moves the specimen holder slowly
to the right in the X-direction in
steps of 5 µm. Keep the key
pressed to increase the speed.


ENTER
 Selects a marked parameter
value or chooses a menu.

POSITION
UP/DOWN

/

Changes to POSITION menu or
moves the specimen holder up- or
downwards in the Y-direction in
steps of 100 µm. Keep the key
pressed to increase the speed.
Front Panel Controls