Stuctura, Inc.
|
9635 Widmer Rd., Lenexa, KS 66215
|
913.390.8787
|
www.structura.com
Duo Bollard
Installation Instructions
Warnings
CAUTION—risk of fire and this product must be installed
in accordance with the applicable installation code by a
person familiar with the construction and operation of the
product and the hazards involved.
Suitable for wet locations.
Mounting orientation must have light source facing down.
Electrical service must be disconnected during installation.
Proper grounding is required to protect against shock and
proper operation.
Tools Required
T20 Tamper-resistant drive for panel screws
9/16” socket or wrench for anchor bolts
Philips drive for driver box lid
Wiring tools and connectors
Bollard Installation
Step 1: Turn off power to location.
Step 2: Remove (4) 8-32 tamper-resistant torx screws from
lower accent panel. Safely set panel aside.
Step 3: Set bollard on to pre-installed anchor bolts from
footing detail. Make sure bollard is level.
Step 4: Secure bollard with supplied (4) 3/8”-16 nuts and
washers.
Step 5: Connect power to LED driver as shown on page 2
for driver wiring.
Step 6: Re-secure accent panel.
Step 7: Turn power back on.
Driver
LED Module
8-32 Tamper-Resistant Torx
Accent Panel
3/8"-16 Nut
and Washer
