BM97
STEP 6.
Slip the “narrow nose” of the #HE47
Hitch Extender into the “channel” section of
the #1921 Bucket Hitch.
STEP 7.
Align the two 1/2” holes [top and bot-
tom] of #HE47 Hitch Extender with mating 1/2”
holes in #1921 Bucket Hitch. From above, slip
an AF Bolt into each pair of mating 1/2” holes
and secure below with MM Nuts...
tighten.
STEP 8.
Align two
forward
1/2” holes in #1694 Front Hitch
with two mating 1/2” holes in
mid-center
of #HE47 Hitch Ex-
tender. Insert AF Bolts into these two
mating
1/2” holes and
also into the remaining two 1/2” holes in rear of Hitch Ex-
tender. Secure all AF Bolts below with 1/2” Nuts...
tighten.
STEP 4.
From outside, insert a Bolt, Washer & (2)
Bushings
Assembly
[from STEP 1 above] into each of
these two sets of
aligned
1/2” holes.
STEP 5.
Secure each
Assembly
with a VV Washer and
II Nut...
tighten so Bucket can
easily
rotate
on its mat-
ing #1921 Right & Left Ears... see Photo at right and
bot-
tom
of previous page.
1921
Left
Ear
1921
Right
Ear
Bolt, Washer,
(2) Bushings &
Nut
Assembly
Bolt, Washer,
(2) Bushings & Nut
Assembly
1712
Right Bucket Wall
“narrow nose”
HE47 Hitch
Extender
“channel section”
1921 Bucket Hitch
1712 Bucket Assembly
AF Bolts
and
MM Nuts
AF Bolts
and
MM Nuts
1694
Front
Hitch
STEP 9.
Remove your seat and rear cover assembly at
this time. Reference
page 23
in the main part of your
RS1000 manual, under
Section 7-Service
.
