BM68
STEP 4.
Make up (2) 1/2” bolt assemblies
consisting of the following: (1) #AR Bolt and (1)
#VV Washer.
STEP 5.
Slide in a #4178 Bar Spacer between
the left angle mount and the #4179 Back Chan-
nel. Using a punch or a long bolt as a guide to
line up the bolt holes, insert (1) Bolt Assembly
from step 3, through the lower hole on the
#4179 Back Channel, through the correspon-
ding lower hole on the #4178 Bar Spacer and
then all the way through the other side of the
Left Angle Mount. Attach a #VV Washer and
then an #AS Nut.
Leave loose.
Do the same
process to the Right Angle Mount.
STEP 6.
Remove the (2) #JJ Nuts from the
top 2 holes. All bolts potruding through the rear
of the RS1000 should
NOT
have any #JJ nuts
on them at this time.
STEP 7. If you are attaching a HRH35
Hydro Rear Hitch
to the back of the tractor, re-
insert your #1706 Shaft from your HRH35
Hydro Rear Hitch prior to attaching the #1680
hydraulic tank mount to the back of the tractor.
Re-install the #1680 hydraulic tank mount as
shown. See pg. BM49 in this manual. After
completion, all #JJ Nuts on the #1680 Rear
Mount should be
tightened at this time.
STEP 8. If you are attaching a Backhoe
to
the back of the tractor, please re-install the
#1762 Backhoe Bracket at this time. After com-
pletion, all #JJ Nuts on the #1680 Rear Mount
and the #1762 Backhoe Bracket should be
tightened at this time.
4179
Back
Channel
Left
Angle
Mount
Right
Angle
Mount
4178
Bar
Spacer
(Between)
Right View
1680
Rear Mount
1680
Rear Mount
4179
Back Channel
1706
1762
Left View
