BM52
Power Pack Kit
PP35
[continued]
Fastener List
1/4-20x3/4
Flange Bolts (4)
1/4-20
Flange Nut
(4)
5/16-18x1/2
Flange Bolt
(1)
5/16-18x1-1/2
Flange Bolt
(1)
5/16-18x1-1/2”
Carriage Bolt (1)
15/16-18
Flange Nut
(15)
5/16-24x3/4
Flange Bolt
(4)
3/8-16x1
Flange Bolt
(6)
3/8-16x1-1/4
Flange Bolt
(2)
3/8-16
Flange Nut
(8)
NOTE: Before you begin your PP35 Power Pack assembly, a few important
facts should be brought to your attention:
A)
References of right & left are determined by standing behind your Crawler and looking forward.
B)
Though the following instructions are inclusive, some of the Steps have already been completed at
the factory...just go on if you find a particular step has already been completed for you.
C)
Photos of various assembly Steps are located throughout the instructions and we’ve tried to keep the
more timely photos next to the instructions of the components they describe. NOTE: some photos show
completion of Steps that will come later in the instructions.
You will find it helpful though, to look at photos from other sections of these instruction to see different
views of particular parts you are presently assembling.
D)
As many of the components you will be working with are awkward and occasionally heavy, it’s a good
idea to have a helper available for assistance.
E)
It can never be mentioned too much; always work on your Crawler with it’s Parking Brake on, the
Engine shut off, the Ignition Key removed and the (-) Ground Cable removed from Battery.
F)
Several pages of photos are published at the end of these Instructions. They are fully labeled and act
as a full reference of all the parts you will deal with in your assembly. They are an excellent resource to
get an overview of the whole project if you meet a “snag” in your assembly
G)
The length of a Bolt is determined by measuring the threaded shank below the Bolt’s head.
Note: If you’re going to be connecting your PP35 Power Pack to a HFH15
Front Hitch and/or a HRH35 Rear Hitch,
complete
those KIT assembly steps
first!