BM17
R Bolts (3) & HH Nuts (3)
R Bolts (5) & HH Nuts (5)
4119
4121
Top Blade
Mount
[with slotted
holes]
4120
Bottom
Blade
Mount
4118
STEP 1.
Locate the five (5)
5/16” slots in #4119 Edge with mating
five 5/16” holes in
lower edge
of #4118
Blade. From the
front
, slip a #R Bolt into
each of these mating five slots & holes.
STEP 2.
Rotate Blade. On the
reverse side
align the three 5/16” holes
in
edge
of #4120 Bottom Blade Mount
with the
three
mating #R Bolts in
center
of Blade... see Photo at right.
NOTE:
Holes in #4119 Edge are slotted
to allow horizontal movement to square
bottom of Edge with ground if needed.
Secure all five #R Bolts [from
STEPS 1 & 2] with #HH Nuts on
rear
of
Blade... tighten... see Photo at right.
STEP 3.
Insert three (3) #R
Bolts into remaining three 5/16” holes in
front face
of #4118 Blade.
Behind
Blade, slip the three mating
5/16”
slotted holes
of
top edge
of #4121
Top Blade Mount over the three protrud-
ing #R Bolts... secure with three (3)
#HH Nuts... leave Nuts loose... see
Photo upper near right.
Mounting Blade to Front Hitch:
Slip Blade Assembly onto #1694
Front Hitch... align 1/2” holes in #4121
Top and #4120 Bottom Mounts with
mating 1/2” holes in Front Hitch. Insert
#AF Bolts into mating holes... secure
below with II Nuts.
NOTE:
[#AF Bolts & #II Nuts are re-
maining from assembly of Front Hitch]
Tighten the #R Bolts (3) and #HH
Nuts (3) on #Top Blade Mount.
NOTE: Blade angle can be set to
push straight ahead or cast material
to left or right. [Photo shows angle to
the left]
R Bolts (3) &
HH Nuts (3)
DB44
Blade
Assembly
AF Bolt (2)
4120
MM Nut
4121
1694 Front Hitch
R Bolts (5)
