Page 9 of 14
Maintenance
Maintain the jack set by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from
oil and grease. The following chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
Daily before operating
Use only a small amount of soap and a damp cloth to clean
the jack set.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
The pedal will not
move properly.
The pedal lock is locked.
Release the pedal lock.
Cannot open the jacks.
The lock pin is still in the
frame.
Pull the lock pin out from the frame.
The valve is locked.
Open and release the valve by turning the hand-
wheel counter-clockwise.
Summary of Contents for 61132
Page 10: ...Page 10 of 14 Parts Diagram ...
