Page 6 of 12
⚠
WARNING
ELECTRICAL SAFETY
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
⚠
CAUTION
FAN USE AND CARE
Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.
Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store the fan when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Specific Operation Warnings
⚠
WARNING
Electric shock hazard. Do not expose fan to water or rain.
To reduce risk of fire or electrical shock, do not use this fan with any solid state speed control.
Be sure equipment is properly grounded.
Do not use an extension cord with this product.
Rotating blade hazard. Keep hands clear from blade during operation.
Automatically operated device. To reduce risk of injury, disconnect from the power supply before
servicing.
Explosion hazard. Do not use this fan in the presence of flammable liquids, gases or dust.
Disconnect power before servicing.
Installation work and electrical wiring must be done by qualified person(s) in accordance with all
applicable codes and standards, including fire-rated construction.
Use OSHA approved lock-out tag-out devices on power supply to prevent shock and/or
electrocution.
