background image

Page 4 of 12 

 

Intended Use 

Strongway

’s #52723 1/5 HP Mini Air Mover with Timer is intended to move air to dry floors, walls, 

furniture, 

and other areas. It’s durable and easy to operate with an effective balance of static pressure 

and airflow making this unit suitable for a variety of applications.  

Technical Specifications 

Model 

#52723 

Volt / Frequency 

115 Volts / 60 Hz 

Power 

1/5 HP 

Amp 

2.3 Amps 

Rated Airflow (on High) 

800 CFM 

RPM (Low/Medium/High) 

1000/1250/1500 

Available Speeds 

Important Safety Information 

WARNING

 

 

Read and understand all instructions. Failure to follow all instructions may result in serious injury 

or property damage. 

 

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or 

situations that could occur. Exercise common sense and caution when using this air mover. 

Always be aware of the environment and ensure that the air mover is used in a safe and 

responsible manner.  

 

Do not allow persons to operate or assemble the air mover until they have read this manual and 

have developed a thorough understanding of how it works. 

 

Do not modify this air mover in any way. Unauthorized modification may impair the function 

and/or safety and could affect the life of the air mover. There are specific applications for which 

the air mover was designed.  

 

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger 

industrial equipment. There are certain applications for which this equipment was designed. It 

will be safer and do the job better at the capacity for which it was intended. DO NOT use this 

equipment for a purpose for which it was not intended. 

 

Industrial or commercial applications must follow OSHA requirements. 

 

WARNING

 

WORK AREA SAFETY 

 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. 
Cluttered, wet, or dark work areas can result in injury. Using the air mover in confined work 
areas may put you dangerously close to cutting tools and rotating parts. 

 

Do not use the air mover where there is a risk of causing a fire or an explosion; e.g., in the 
presence of flammable liquids, gases, or dust. The air mover can create sparks, which may 

Summary of Contents for 52723













Reviews: