Page 6 of 9
Assembly Instructions
Before assembling, remove all parts from the box and count the quantities for each.
1. Mounting the rigid caster. Turn the platform over, insert the channel into the rigid caster, then
place the plastic washer on two sides of the rigid caster. Use the screw and lock nut to fix the
assembled rigid caster into the wheel bracket in the middle of deck.
2. Mounting the swivel caster. Place the swivel caster in position, then affix the caster tightly with
the screw and lock nut. Do the same for the other three casters.
3. Inserting the removable handle. Turn back the deck and place the handle into the correct
hole. Use the same process for the other handle.
The truck is now ready for use.
Maintenance
Maintain the truck by adopting a program of conscientious repair and maintenance in accordance with
the following recommended procedures
.
It is recommended that the general condition of any tool be
examined before it is used. Keep your tool in good repair.
Parts Diagram
