Use the
0-9
buttons if you want to change this time.
7.9 Media Center
Multimedia
This item allows playback of different kind of files from the connected USB storage device.
Select
Music
and press
OK
to playback MP3 files from your folders. Select
Picture
and press
OK
to view
your favourite pictures in JPG format. Select
Movie
and press
OK
to enter to play a number of video
formats. Select
Record Manager
and press
OK
, to see a list of record you have made. The unit supports
USB HDD devices with FAT32 format. However, it is possible to use already on a PC formatted NTFS HDD
device. Make sure your USB device is formatted correctly. Use the On-Screen button suggestions and the
multimedia buttons like
6
,
5
,
3
and
2
on the remote control to work inside the multimedia player. Use
the
COLOURED BUTTONS
with their shown function to manage the media player.
Picture
Setup
Setup your preferences for Photo viewing.
Slide Show
Press
BLUE
and select {On
and photos will be shown in an automatic slide
mode.
Slide Show Time
Time between advancing to the next photo.
Movie
Text Encode
For Subtitle use in the movie player, setup the feature here. Subtitles with
downloaded movies can use several formats.
DVR Configuration
For this option to work, you must have a USB device connected.
HDD Information
Some technical information is shown about the connected USB Device.
Time Shift
Select
On
to use time shift. Storage space will be reserved for Time Shift.
Storage Format
Some technical information is shown about the current partition or device.
The use of a USB Hard Disk Drive, already formatted in a PC with FAT32 or
NTFS is recommended.
In the receiver you can format a USB device with FAT32 only. Select
HDD
Format
to start format.
All data on a USB device will be overwritten and lost if you format the device.
DVR Partition
If your USB device should have more than 1 partition, select the one to use.
WARNING:
The format function will delete all data and information from your USB
device or selected partition. Manufacturer will not take any responsibility for
damaged or lost data on the USB device.
If you have multiple partitions on your storage device, select the partition you would like to format and
select
HDD Format
then press
OK
to continue. A confirmation banner will now be displayed. Select
OK
to
start formatting (or
EXIT
to cancel it). The format procedure will take some time, depending on the size
of the used storage device. At the end of the process, the “Formatting is complete” message will appear.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Check the receiver according to the
procedures shown below. If the receiver does not work properly after checking it, please contact your
dealer or the local Service Hotline or send email to our Support via www.strong.tv. Do NOT try to open or
disassemble the receiver. It may cause a dangerous situation and warranty will be void.
16
Summary of Contents for SRT 8208
Page 3: ......
