Strong SRT 8203, User Manual

Page: 12 / 37

8
English
3.6 Connecting to TV with mini AV-3RCA cable
Fig. 6
Connect one side of the cable with the mini AV connector to the AV output of the receiver and the other
side of the cable - with 3 RCA connectors to the RCA inputs of your TV set. Connect in accordance with
the colour marking of the TV inputs and the connectors of the cable.
NOTE:
You should switch your TV set to Video mode. For more details, see chapter
4. Starting up for the first time
.
3.7 Connecting a USB storage device
Fig. 9
Connecting a USB device to the unit allows you to playback multimedia files. See chapter
7.6 Media
Center
.
NOTE:
It is recommended to use USB 2.0 storage devices or higher for recording
and playback of TV programmes or HD movies.
NOTE:
Timeshift/recording and playback only works properly when a fast
USB storage device such as a USB 2.0 HDD is connected to the receiver.
Timeshift/recording and playback of HD content requires a sufficient read/
write speed of the used USB storage device.
4.0 STARTING UP FOR THE FIRST TIME
After all connections have been made properly, switch on the TV and make sure the receiver is
connected to the main power.
If the mode indicator on the front panel is red, press
q
to switch on the receiver.
If you are using the receiver for the first time or restoring to Factory Default, the Init Install menu will
appear on your TV screen.
If your receiver is connected to a TV set by a mini AV-3RCA cable (supplied), then it is necessary to switch
the TV set to the AV input.
To do this:
„ „
Read the corresponding chapter of the user manual of your TV set.
„ „
Use the remote control of your TV set and switch it to AV input. Most of remote controls has
a dedicated button to select the source of the signal. Often this button is named as: «АV»,
«VIDEO», «INPUT», «Source» or with the symbol  . If you have selected correct input, then
you will see the on-screen menu of the receiver named «Init Install».
NOTE:
Depending from brand and model of your TV, the name of the AV input can
be different, for example: Video1, AV1.
If your receiver is connected to the TV set by an HDMI cable (not supplied with receiver), then it is
necessary to switch the TV set to the HDMI input.
To do this:
„ „
Read corresponding chapter of the user manual of your TV set.
„ „
Use the remote control of your TV set and switch it to HDMI input. Most of remote controls
has a dedicated button to select the source of the signal. Often this button named as: «АV»,