Strong SRT 8203, User Manual

Page: 10 / 37

6
English
7.
REC
Press to record a TV programme
8.
SUB
Shows a list of subtitle languages
9.
MENU
Opens or close of main menu
10.
EXIT
Exit the current menu or returns to the previous menu
11. pq Menu Off: Change channel to next/previous.
Menu On: Moves the cursor up/down
12.
t u
Menu Off: Decreases/increases the volume level
Menu On: Navigate through the menus and to enter or exit settings for
specific menus
13.
0K
Menu Off: Displays the current channel list.
Menu On: Activates the highlighted menu item
14.
FAV
Display or edit the favourite programme list
15.
TV/R
Switch between TV and Radio mode
16.
0-9
Enters a channel number in viewing mode or a value inside the respective
menu
17.
RECALL
Back to previously watched channel
18.
GOTO
Set the play time of media
19.
5
Search backward during media play
20.
6
Search forward during media play
21.
7
Change media file to previous
22.
8
Change media file to next
23. u Starts/resume playback of records and media files
24.
2
Pauses playback
25.
3
Stop media playback or to stop recording or Timeshift
26.
REPEAT
Turn on/off repeat mode
27.
COLOUR BUTTONS
For Multimedia and Teletext functions
2.5 Installing the batteries
Fig. 4
Open the cover on the remote control and insert 2x AAA batteries into the compartment. Correct
position of the polar diagram shows the batteries inside the compartment.
1. Open the cover.
2. Insert the batteries.
3. Close the lid.
WARNING!
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
2.6 Using the remote control
Fig. 5
To use the remote control, point it towards the front of your receiver. The remote control supports a
range of up to 5 meters distance to the receiver at an angle of up to approx. 30 degrees.
NOTE:
Managing the receiver will be limited or not possible if there are obstacles
between the remote control sensor (at the front panel of the receiver) and
the remote control. Direct sunlight or very bright light can reduce or disturb
the reception of the remote control signals.