9
PART 1 • English
English
To stop a recording press SToP button on remote control. Another way of doing recordings is to use the
Timer – please refer to 7.4.1
Timer
of this manual.
Average record size (values are approximately, depend from bit rate of actual broadcast):
MPEG2 SD channel – 1 hour take about 2.2 GB space
MPEG4 SD channel – 1 hour take about 1 GB space
MPEG4 HD channel – 1 hour take about 4.5 GB space
Accessing to the recordings: You can access recordings by pressing the lIST button on the remote
control. The list of recordings can also be accessed through
Menu
–
USB
–
Multimedia
–
Records
. Please,
refer to 7.7.1
Multimedia
for details of available functions.
6.12 Time Shift
The Time Shift function allows you to pause live broadcasts and resume normal watching without
missing anything. Make sure there is a compatible USB device connected and there is enough free space
on it. Press
2
to freeze the current broadcast. Press
2
again or
u
to start time shifted playback. You
can check the Time Shift duration banner and further details by pressing the Info button. For closing
banners use Info again or press EXIT. Use goTo button to enter the desired time moment you want to
jump to. To stop Time Shift press
3
and confirm with ok (or press EXIT to cancel).
During Time Shift you can use the
tt
and
uu
buttons to review or forward the playback with x2, x4,
x8, x16 and x32 speed. If reviewing reaches the beginning, it will resume to time shifted playing, and if
forwarding reaches the end, it will change to record mode.
You can (re)start the Time Shift during recording as well. Just switch to the recorded channel and
proceed like explained above.
noTE:
The Time Shift will only work correctly when a fast USB storage device such as an
USB 2.0 HDD is connected to the receiver. Distorted picture and / or audio during Time
Shift indicate a low USB device speed. STRONG cannot guarantee for USB devices
used. Especially when Time Shift is activated at channels with high data rate (High
quality SD/HD), STRONG cannot guarantee an accurate Playback of the Time Shift file.
7.0 MAIn MEnU
7.1 Program
Press MEnU and select
Program
using
tu
buttons. Press ok or
q
button to enter the
Program
submenu. Press ok or
u
button to edit program settings. Press EXIT to exit the menu.
7.1.1 Program Edit
To edit your program preferences (lock, skip, favourite, move or delete), please go to
Program
Edit
menu.
This menu requires a password to access. Enter your password or use the default password ‘0000’ if
you did not change it. Use
pqtu
to highlight a channel, Tv/RADIo to toggle between TV and radio
channel lists and goTo to select the desired satellite (if more than one available).
Set favourite program
Your receiver allows you to store channels in up to 4 favourite lists. Due to the large number of channels
available on satellite nowadays, this can be a very useful function.
1. Highlight the preferred program then press the fAvoURITE button.
A
Favourite
Type
window will pop up on screen. The following 4 groups are available:
Movie
,
News
,
Sport
and
Music
. Please select one (or more) of them. A heart-shaped symbol will
appear and the program is marked as a favourite. Press EXIT to return to the channel list for
further selection.
2. Repeat the previous step to select more favourite programs.
3. To confirm and exit the menu, press EXIT
Summary of Contents for SRT 7000
Page 1: ...User Manual Digital High Definition Satellite Receiver SRT 7000 Picture similar ...
Page 2: ......
Page 3: ......
