
9
PART 1 • English
En
gl
is
h
4. When
By
Channel
is selected use the cursor buttons to select
Scan
Band
and
Channel
No
.. When
By
Frequency
is selected use the cursor buttons to select Frequency and
Bandwidth. Set
Network
Search
to ON or OFF, highlight
Search
and press oK to
start scanning. Found channels will be stored and the receiver will switch to the first
channel in the list.
5.2.3 Antenna Setting
1. Press mEnU to enter main menu.
2. Use the
qp
buttons to select
Installation
and press oK to enter the menu.
3. Select
Antenna
setting
with
qp
and press oK to enter.
4. Use the
tu
buttons to change the setting. If
On
is selected, the receiver will provide
5V antenna power (for active antennas).
5. Press EXIT button to exit.
5.2.4 lCn mode
If LCN (Logical Channel Numbering) is activated and LCN signal is provided by the operator,
channels will be stored in operator defined order. You can activate/deactivate the LCN function by
setting the
LCN
Mode
to
ON
or
OFF
.
5.3 Setup
This menu allows you to set
OSD
Language
,
Subtitles
preference
,
TV
System
,
Region
and
Time
,
Timer
Setting
,
OSD
Setting
and
Parental
Lock
.
1. Use
pq
to highlight the desired menu and press oK to proceed. Select the desired
item with
pq
. Settings can be changed with the
tu
buttons. To get a better
overview of possible settings, press oK first. Now you can select settings with
pq
and confirm with oK.
2. Press EXIT button to exit.
5.3.1 oSD language
This menu allows you to set the OSD Language.
5.3.2 Subtitles preference
This menu allows you to set the preferred
Subtitles
Language
and to switch
Subtitles
Type
between
Normal
and
Hard
of
Hearing
.
5.3.3 Tv System
This menu allows to setup different settings concerning your TV set.
Display
Mode
:
PAL/NTSC/AUTO
Aspect
Ratio
:
Use this menu to configure the screen aspect. Possible settings are:
4:3PS
(Pan&Scan), 4:3LB (Letter Box), 16:9 (Wide Screen)
and
AUTO
.
Video
Output
:
Use this menu to switch the video output mode between
RGB
and
CVBS
.
5.3.4 Region and Time
Here you can set your region and time zone.