6
PART 1 • English
3.3 Remote Control
Fig. 4
1.
q
Turns the receiver On/Standby
2.
!
Mutes audio output of the receiver
3. Pg+/Pg-
Page up/down
4. DTv/vCR
No function
5. Info
Shows the actual channel information
6. vol+/vol-
Volume up/down
7. mEnU
Opens the main menu/In menu you will get one step back
8. EXIT
Exits from the menu or sub-menu
9.
pq
Menu On: Moves the cursor up/down.
Menu Off: Change channel to previous/next.
10.
tu
Menu On: Change settings for specific Menus
Menu Off: Increases/decreases the volume level.
11. oK
Menu On: Activates the highlighted menu item.
Menu Off: Displays the current channel list
12. RECoRD
No function
13. TImEShIfT
No function
14. 0~9
Channel selection or value input
15. EPg
Shows the EPG (Electronic Program Guide) in TV mode
16. RECAll
Back to previous shown channel
17. AUDIo
Sets the current audio channel to left, right or stereo
18. Tv/RADIo
Toggles between TV or RADIO mode
19. fAv
Favourite group selection
20. fIlE
no function
21. TTX
Shows Teletext on OSD (On Screen Display)
22. SUbTITlE
Shows list of subtitled languages
23.
5
6
Rewind/Fast forward of video files
24. ColoURED bUTTonS
for Teletext and other functions
3.4 Default PIn- code: 0000
4.0 fIRST TImE InSTAllATIon
If you use the receiver for the first time, the
Easy Install
menu appears. Use
qp
to select
Region
,
OSD
Language
,
Antenna
Power
and
Scan
Mode
and
tu
to select options. Then use the
qp
buttons to
move focus to
Search
and press oK to proceed with the automatic channel scan.
5.0 mAIn mEnU
In viewing mode press mEnU at any time to enter the Main Menu. It consists of the following
submenus:
Channel
,
Installation
,
Setup
,
Tools
and
Media
+
5.1 Channel
1. Use the
qp
buttons to select
Channel
and press oK to enter.
2. Use the
qp
buttons to highlight the desired item and press oK to select.
