background image

24. 

LIST

 

 Press to enter the channel list.

25. 

TEXT

 

 Press to enter or exit the teletext menu.

26. 

SUB

 

 Enable/disable subtitles in DTV mode.

27. 

9

 

 Return to previous channel in TV mode.

28. 

ECO

 

 Select desired power saving mode.

29. 

5

 

 Press to fast reverse.

30. 

6

 

 Press to fast forward.

31. 

7

 

 Press to play the previous file.

32. 

3

 

 Press to stop playback.

33. 

u

 

2

 

 Press to pause playback, press again to continue playback.

34. 

8

 

 Press to play the next file.

35. 

4

 

 No  function.

36. 

AUDIO

 

 Select audio language.

* Membership is not included. Netflix is available in selected countries. Streaming Netflix requires to set up an account. Broadband Internet 
required. See www.netflix.com/TermsOfUse for details.

2.5 Installing the batteries

Fig. 5

Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the 
polarity markings inside the compartment.

NOTE:

 

 Pictures are for reference only. Actual items may differ.

1.  Open the cover.
2.  Put 2x AAA batteries in the compartment and make sure the polarity is correct.
3.  Close the cover.

Precautions for using the battery

Improper using of the battery will cause leakage. Carefully follow these instructions.

1.  Please note the batteries' polarity to avoid short circuit.
2.  When the battery's voltage is insufficient which affects the use range, you should replace it with 

a new battery. Remove the batteries from the remote-control unit if you do not intend to use it 
for a long time.

3.  Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
4.  Do not put the battery into fire, and charge or decompose the battery.
5.  Please dispose batteries abide by relevant environmental protection regulation.

2.6 Using the remote control

„

„

Use the remote control by pointing it towards the remote sensor. Items between the remote 
control and the remote sensor could block normal operation.

„

„

Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote 
control or put the remote control in a high humidity place.

„

„

Do not place the remote control under direct sunlight which will cause deformation of the unit 
by heat.

„

„

When the remote sensor is under direct sunlight or strong lighting, the remote control will not 
work. If so, please change the lighting or TV's position, or operate the remote control closer to 
the remote sensor.

* to confirm your choices use 

OK

 button or right 

ARROW

 button.

7

English

Summary of Contents for SRT 43UB6203























Reviews: