5.2 Channel menu
Press
Menu
to display the main menu. The
Channel menu
is the first that appears. Press
pq
to select the
option you wish to adjust in the
Channel
menu.
Press
OK
to adjust. After finish your adjustment, press
OK
to save and return to the previous menu.
5.2.1 Auto Tuning
Press
pq
to select
Auto Tuning
, then set the
Tuning Setup
menu according to your needs and proceed
with
OK
.
5.2.2 Dish Setup (in DVB-S mode only)
If you use
Satellite
as input source, you should first set the
Dish Setup
menu. In this menu, you can easily
modify the Satellite and LNB settings. Afterwards you may start the
Auto Tuning
.
5.2.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press
pq
to select
DTV Manual Tuning
.
Press
t
u
to select a
Channel No.
, and then press
OK
to start the search. The search stops when a
programme is found and this programme will be stored in the current channel position. If you want to
stop the search, press
Menu
.
5.2.4 ATV Manual Tuning (in DVB-T/C mode only)
Search and store programmes manually (analog). Press
pq
to select
ATV Manual Tuning
. Then press
OK
to enter the submenu.
Press
pq
to select
Current CH 1
(maybe other number),
Colour System
and
Sound System
. Then select
search and press
u
to search towards higher frequency or press
t
to search towards lower frequency.
The search stops when a programme is found and this programme will be stored in the current channel
position. If you want to stop the search, press
Exit
.
Current CH
Set the channel number
Colour System
Select the colour system (Available: AUTO, PAL, SECAM)
Sound System
Select the Sound system
Fine-Tune
Adjust the frequency of the channel
Search
Start the channel search
5.2.5 CADTV Manual Tuning (in DVB-C mode only)
Search and store programmes manually (digital). Press
pq
to select
CADTV Manual Tuning
. Then press
OK
to enter the sub-menu.
Here it is possible to insert a specific frequency (usually provided by the broadcaster). In this case, it will
be requested to insert a specific frequency, Symbol Rate and QAM Type. Use
pq
to select the option to
change, then use the number keys on the remote control to insert the frequency and the Symbol Rate;
use
t
u
to set
QAM Type
.
By selecting
OK
the TV will start the search.
9
English
