Revised 01-11-2017
SWKL25SB Knight Light
Instruction Manual
CHARGING
1. The rechargeable batteries are already installed. Please do not attempt to open
the unit, as this will void the warranty.
2. We recommend charging the Knight Light before it is used. Simply plug the
charging cord into the bottom of the unit and into a standard outlet. The yellow light
on the bottom of the unit will illuminate while the charging cord is plugged in. Note
that the yellow light does not turn off or change color when fully charged. Simply
charge for 5 hours then unplug it from the charging cord.
IMPORTANT: Do not
charge for more than 5 hours at a time.
Overcharging can damage the unit and
void the warranty. When used infrequently the unit will need to be recharged for 5
hours every 60 days. If the flashlight is not as bright or if the electrical current
becomes noticeably weaker, the unit will need to be charged.
USING THE FLASHLIGHT
Note: The flashlight will work with the Stun ON/OFF Switch in either the ON or OFF
position.
If you are in a situation where you might need to quickly activate the stun gun
(like walking at night) we recommend you use the ON position. If you don’t anticipate
needing the stun gun (at home during a power outage) we recommend the OFF
position.
1. Slide the Function Select Switch up to the top position.
2. The flashlight will come on in either: Hi, Medium, Low, Strobe, or SOS mode.
3. If you want to change to another light mode move the Function Select Switch down
to the middle position, then back up to the top position.
1. Stun Contact Probes
2. LED Flashlight
3. Function Select Switch
4. Charging Port
5. Stun On/Off Switch
6. Charging Indicator Light
7. Stun Activation Button
1
3
1
2
4
7
6
5
