Preparation for Installing the Motherboard
The FC10 can accommodate an ATX, Micro-ATX or Mini-ITX
motherboard and depending on which one is used, the appropriate
stand-offs should be fitted to the bottom panel of the case. Note that the
Mini-ITX stand-offs are already fitted to the case as they are common to all
motherboards. The type of motherboard used will also determine the
choice of other internal components such as additional 3.5" hard drives
and optional internal PSU. Check your motherboard hole locations and fit
the appropriate stand-offs in the corresponding position on the bottom
panel. The stand-offs can be hand tightened in place.
mITX
mATX
ATX
Installing the I/O Shield
Locate the I/O shield supplied with your motherboard and firmly push it in
place. Ensure that it correctly seated otherwise the motherboard will be
difficult to install and not align correctly with the stand-offs.
HS-M3x7
5
