Commissioning
Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13
101
5.6 Unlock the crossover conveyor at each
receiver crossbeam (10) by means of the
two locking bolts (9).
5.7 Lift the crossover conveyor out of the
receiver crossbeams and roll it into its
storage position.
5.8 Insert both locking bolts (9) into each
receiver crossbeam (10).
6. Fasten both receiver pipes (7) in the rear
borehole (8).
7. Secure the tailgate in its closed position:
7.1 Unlock and remove the two locking
bolts (5).
7.2 Move the tailgate into its closed
position and insert both locking bolts (5) into
the upper boreholes of the side bars (6) and
secure them.
Thus, the tailgate cannot swivel backwards
again.
Fig. 76
8. Adjust the lamp brackets (1) with respect to
the tailgate (2):
8.1 Lift the lamp brackets (1).
8.2 Pull the locking bolt (3) out as far as it
will go.
8.3 Tilt the lamp bracket (1) over to the
front.
8.4 Position the lamp bracket (1) in the rear
keyhole profile (4) by means of the locking
bolt (3).
8.5 Press the lamp bracket (1) down again.
9. Loosen the stop-cock (Fig. 91/17) such that
the tailgate can be moved again.
Fig. 77
6.2
Check machine for proper functioning
Check the machine for proper functioning before the first startup and each time before starting work:
1. Hitch the machine to the tractor.
2. Completely lubricate the machine and the propeller shaft. Observe the information in the chapter