Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 39 / 327

Product description
39 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
2.12 Transport floor
The chains (1) of the transport floor are equipped
with U-sections (2) and ensure consistent
feeding of the loaded material when charging
and discharging. Automatic chain tensioners
tighten the chains.
The transport floor is driven hydraulically via two
feed gearings.
The control set serves:
•
to switch the transport floor on and off,
Fig. 25
•
to variably adjust the feed rate of the transport floor. The controllable volume flow of the
hydraulic oil is 2-80 l/min.
•
to reverse the feed direction of the transport floor for a short time (max. 3 seconds), e.g. to
eliminate blockages occurred at the beaters during discharge.
2.13 Front panel with incorporated automatic charging system
Switch the automatic charging system on for uniform and complete
filling of the cargo space.
The automatic charging system:
•
has to be switched on only once,
•
automatically switches the transport floor on and off during
charging,
•
is automatically deactivated if the control set generates an
acoustic signal (horn sound) and a visual signal ("Forage
wagon full"),
•
is automatically activated if the forage wagon has been emptied
and the pick-up is lowered the next time,
•
remains switched on until the automatic charging system is
manually switched off.
The automatic charging system only works with the pick-up lowered.