Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 35 / 327

Product description
35 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
2.7.4 Load-sensing hydraulic system
•
Connect the hydraulic system only after it has been
depressurised.
•
Turn the tractor engine off before connecting the hydraulic
system.
•
Always connect the load-sensing control line when connecting
the hydraulic connector "Flow line" to the pressure line leading
to the hydraulic pump of the tractor provided for this purpose.
The electro-hydraulic control block of the machine is directly connected with the hydraulic pump of the
tractor via the load-sensing control line. The current machine demand for hydraulic oil determines the
pressure and the delivery rate of the tractor's hydraulic pump.
Tractor Machine
Fig. 18
(1) Electro-hydraulic control block at the machine
(2) Load-sensing control line
(3) Adjustable hydraulic pump of tractor
(4) Hydraulic connector "Return line", connected to the free return port of the tractor provided for
this purpose,
not via control device
(5) Hydraulic connector "Flow line", connected to the pressure line leading to the hydraulic pump of
the tractor, oil supply
not via control device
If the standby pressure in the LS system is too low and cannot be
increased at the tractor, it is possible to retrofit an LS amplifier.
Please contact your dealer.